<?xml version="1.0" encoding="UTF-8"?><!-- generator="WordPress.com" -->
<rss version="0.92">
<channel>
	<title>Alex Bausk&#039;s Structural Blog</title>
	<link>http://bausk.wordpress.com</link>
	<description>Engineering itself on the web since 2007</description>
	<lastBuildDate>Thu, 12 Nov 2009 19:59:23 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>Modeling IV: Concrete FEM finished</title>
		<description><![CDATA[Pic related:

P.s. Meshing in RSA using imported geometry is total hell.
Somehow the 3dfaces in AutoCAD do not fit properly when using OSNAP and the mesher goes mad/
       <img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=226&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/11/12/modeling-iv-concrete-fem-finished/</link>
			</item>
	<item>
		<title>Modeling III. Yet another teaser</title>
		<description><![CDATA[Well, I&#8217;m bulldozing my way through a bunch of meshing problems in Robot SA now.

Image: Reactor cavity finite element model, working draft.
I hope I&#8217;ll end up having a nice and smooth FEM of the VVER-440 reactor compartment.
The next stage is seamless integration of the steel superstructure and the surrounding concrete substructure into united FE model [...]<img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=222&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/11/10/modeling-iii-yet-another-teaser/</link>
			</item>
	<item>
		<title>BricsCAD progresses</title>
		<description><![CDATA[The list of recent improvements in the new BricsCAD version is rather impressive.
Keep up the good work, B. Someday you&#8217;ll match the earlier AutoCAD releases and we will all migrate and dump the horrile 3D monster AutoCAD mutated into.
: &#8211; )
       <img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=218&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/11/03/bricscad-progresses/</link>
			</item>
	<item>
		<title>Modeling II. Another teaser</title>
		<description><![CDATA[Here is another teaser of the future description of WWER-440 power reactor building FEM.
Comes hot right off my monitor:

It shows how the internal geometry for concrete walls and concrete containment are modeled using 3DFACE entities to be later exported to Robot SA.
       <img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=201&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/10/21/modeling-ii-another-teaser/</link>
			</item>
	<item>
		<title>Modeling I</title>
		<description><![CDATA[I&#8217;ve just finished modeling geometry of a VVER-440 power reactor building. I&#8217;m completely bushed yet very glad I managed to do it.

It&#8217;s just the steel part of it. Under the trusses will reside the concrete containment and auxiliary structures.
Now a lot of work has to be done further. It&#8217;s just an AutoCAD 3D model. It [...]<img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=197&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/10/18/modeling-i/</link>
			</item>
	<item>
		<title>Protected: Photos from Partenit (protected)</title>
		<description><![CDATA[There is no excerpt because this is a protected post.<img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=195&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/10/14/photos-from-partenit/</link>
			</item>
	<item>
		<title>A Blast from the Past</title>
		<description><![CDATA[Attached follows a screenshot of Robot SA 2009 documentation.

The software to which this sheet pertains has been released by Autodesk in 2008 as I remember. Prior to this, Autodesk acquired RoboBAT, the developer of Robot finite element analysis package.
I posted this sheet to illustrate the current state of Robot documentation, which is frozen at a [...]<img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=155&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/10/06/a-blast-from-the-past/</link>
			</item>
	<item>
		<title>Good news, everyone</title>
		<description><![CDATA[WorldCAD Access writes about Tim Vernor winning a lawsuit against Autodesk. In essense the buzz is about reselling used AutoCAD copies without involving The Mighty and Holy Autodesk.
As many know, copyright infringement poses a serious problem in many countries including East Europe. I personally think that buying used copies at a reasonable price is an [...]<img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=152&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/10/03/good-news-everyone/</link>
			</item>
	<item>
		<title>Protected: Личные фото не для интернетов</title>
		<description><![CDATA[There is no excerpt because this is a protected post.<img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=142&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/10/02/%d0%bd%d0%b5%d0%b4%d0%bb%d1%8f%d0%b8%d0%bd%d1%82%d0%b5%d1%80%d0%bd%d0%b5%d1%82%d0%be%d0%b2/</link>
			</item>
	<item>
		<title>2009-09-30, bye bye September</title>
		<description><![CDATA[Changed blog theme to some other theme. Looks un-cool enough for the blog with semi-professional content.
       <img alt="" border="0" src="http://stats.wordpress.com/b.gif?host=bausk.wordpress.com&blog=3296753&post=130&subd=bausk&ref=&feed=1" />]]></description>
		<link>http://bausk.wordpress.com/2009/09/30/2009-09-30-bye-bye-september/</link>
			</item>
</channel>
</rss>
